Repository navigation
Conversation
For a bio with REQ_PREFLUSH and data, dm core may send an empty flush first. If the flush fails, __dm_io_complete() still reissues the bio without REQ_PREFLUSH and drops the error. When that write succeeds, the XFS log keeps running and fsync() can return 0. End the bio with the flush error instead of writing the data, as blk-mq does. Fixes: 6a8736d ("dm: relax ordering of bio-based flush implementation") Cc: stable@vger.kernel.org Signed-off-by: Daejun Park <daejun7.park@samsung.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
kmb_platform calls byte_rev_table, which lib/bitrev.c provides under BITREVERSE. kmb_platform.c:(.text+0x1473): undefined reference to `byte_rev_table' The driver can be built into vmlinux while GENERIC_BITREVERSE is a module, in which case the symbol is not there at link time. Select rather than depend on: BITREVERSE has no prompt of its own and is only ever enabled by a select, so a depends on would leave SND_SOC_INTEL_KEEMBAY unselectable. BITREVERSE is the symbol to select rather than GENERIC_BITREVERSE: it selects GENERIC_BITREVERSE only where the architecture has no native implementation, so this stays correct on the architectures that do. Reproduced on v7.3, x86_64, with CONFIG_SND_SOC_INTEL_KEEMBAY=y and CONFIG_GENERIC_BITREVERSE=m. Found with kreach, a static check that compares what Kconfig allows against the symbols the compiled objects actually reference. Fixes: c5477e9 ("ASoC: Intel: Add KeemBay platform driver") Signed-off-by: Jude Gyimah <jude.gyimah87@gmail.com> Link: https://patch.msgid.link/20261104135142.3723042-1-jude.gyimah87@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
pxa_ssp_probe() reserves the SSP port before looking up extclk. If the clock lookup returns an error such as -EPROBE_DEFER, the private data is freed but the port remains reserved. A later probe attempt cannot request that port and fails with -ENODEV. Release the reserved SSP port before the existing private-data cleanup when the optional clock lookup fails. Fixes: 90eb6b5 ("ASoC: pxa-ssp: add support for an external clock in devicetree") Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com> Link: https://patch.msgid.link/20261112071757.154652-1-zhujun2@cmss.chinamobile.com Signed-off-by: Mark Brown <broonie@kernel.org>
…git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Fix hugetlb write fault livelock, permission overlay and GCS state
preservation across CPU suspend, cpuidle context tracking during
system suspend, GCS mode handling on signal return, AMU counter errata
workarounds, kexec loading of images with a non-zero text_offset and a
spurious ptrace warning:
- Fix hugetlb write fault livelocks caused by stale read-only TLB
entries after another CPU makes the page writable and only performs
a local invalidate. Unlike the generic fault path, hugetlb has no
fix_spurious_fault() fallback
- Save and restore POR_EL0, GCSPR_EL0 and GCSCRE0_EL1 across CPU
suspend
- Restrict cpuidle context tracking in cpu_suspend() to idle tasks,
avoiding context tracking warnings during system suspend
- Ignore attempts to change GCS mode through signal return, which
updated the software state without updating the hardware. Changes
made through prctl() in the signal handler are preserved. This
changes the documented ABI but no known userspace relies on it.
Allowing mode changes through both prctl() and signal return also
creates confusing interactions, with signal return potentially
undoing changes deliberately made by the handler
- Extend the AMU constant counter workaround to additional CPUs and
add a core cycle counter workaround for Cortex-A715/A720, treating
the affected counters as unavailable
- Avoid CMA allocations when loading a kexec Image with a non-zero
text_offset, fixing an incorrect entry point and a memory leak when
freeing the image
- Remove a spurious ptrace warning when setting the syscall number of
a task in a non-seized group-stop without siginfo"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: suspend: Only track cpuidle context for idle tasks
arm64: ptrace: don't warn on missing siginfo in a group-stop
arm64: kexec_file: Do not use CMA for images with a non-zero text_offset
arm64: errata: Add Cortex-A715/A720 AMU core counter workaround
arm64: errata: Extend the workaround for broken AMEVCNTR01 counter
arm64/gcs: Ignore attempts to change GCS mode during signal return
arm64: hugetlb: Prevent write fault livelocks on stale TLB entries
arm64: suspend: Save GCS state over suspend
arm64: suspend: Save POR_EL0 over suspend
rt5668_calibrate() is called during i2c_probe() and takes calibrate_mutex. However, mutex_init() for that mutex is not called until later in the probe sequence, after the INIT_DELAYED_WORK calls. This means the first calibration locks an uninitialized mutex. While this works by accident because devm_kzalloc zeroes the struct memory, it is incorrect and triggers warnings with CONFIG_DEBUG_MUTEXES=y. Move the mutex_init() call to before rt5668_calibrate() so the mutex is properly initialized before its first use. Fixes: d59fb28 ("ASoC: rt5668: add rt5668B codec driver") Cc: stable@vger.kernel.org Signed-off-by: Tristan Madani <tristan@talencesecurity.com> Link: https://patch.msgid.link/20261111114919.95639-1-tristmd@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
wcd_mbhc_deinit() drains two of the three works embedded in struct wcd_mbhc before freeing it - correct_plug_swch (via wcd_cancel_hs_detect_plug()) and mbhc_plug_detect_work - but not the button long-press delayed work mbhc_btn_dwork: mutex_lock(&mbhc->lock); wcd_cancel_hs_detect_plug(mbhc, &mbhc->correct_plug_swch); cancel_work_sync(&mbhc->mbhc_plug_detect_work); mutex_unlock(&mbhc->lock); kfree(mbhc); mbhc_btn_dwork is armed from the button-press interrupt handler wcd_mbhc_btn_press_handler() with a 400 ms delay: schedule_delayed_work(&mbhc->mbhc_btn_dwork, msecs_to_jiffies(400)); and its handler wcd_btn_long_press_fn() dereferences @mbhc (container_of(), mbhc->current_plug, mbhc->jack). wcd_mbhc_deinit() frees the MBHC interrupts first, which stops new work from being queued, but free_irq() does not cancel a delayed work that was already scheduled. If a button was pressed within ~400 ms of component removal, mbhc_btn_dwork is still pending when kfree(mbhc) runs, so wcd_btn_long_press_fn() later executes against freed memory (use-after-free). The freeing of mbhc was introduced by commit a547582 ("ASoC: codecs: wcd-mbhc-v2: fix resource leaks on component remove"), which switched mbhc to kzalloc() and added the kfree(mbhc) above; the deinit path cancels correct_plug_swch (added with the multi-button support in 0e5c9e7) and, later, mbhc_plug_detect_work (added in 0c10599), but mbhc_btn_dwork has never been cancelled there. Use the existing wcd_mbhc_cancel_pending_work() helper, which cancels mbhc_btn_dwork (via wcd_cancel_btn_work()) and then correct_plug_swch, matching the other cancellation sites in this file and ensuring mbhc_btn_dwork is cancelled before wcd_cancel_hs_detect_plug() briefly drops mbhc->lock. Found by code review; not runtime-reproduced (requires WCD codec hardware and a button-press event racing component removal). Fixes: a547582 ("ASoC: codecs: wcd-mbhc-v2: fix resource leaks on component remove") Cc: stable@vger.kernel.org Signed-off-by: Hyunjung Ko <hj351016@gmail.com> Link: https://patch.msgid.link/20261106114628.2555176-1-hj351016@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
…rg/drm/misc/kernel into drm-fixes Short summary of fixes pull: bridge: - ssd2825: Fix panel enable sequence - sii902x: validate I2S data lane values display: - hdmi: Fixes to SCDC gud: - Avoid divide error in gud_stats_debugfs meson: - load ENCL gamma table while ENCL is disabled nouveau: - disp: Set atomic functions in struct drm_mode_config_funcs - gsp: Handle only IRQs routed to host panfrost: - Fixes to perfcnt sched: - Ensure stopped entity cannot be re-added to the run-queue vc4: - Fix firmware reference leak - Hold runtime PM reference while allocating the binner BO - Rebuild V3D interrupt mask on every power transition - Re-enable the V3D interrupt after a GPU reset Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patch.msgid.link/20261113074438.GA14592@linux.fritz.box
…cm/linux/kernel/git/groeck/linux-staging Pull watchdog fixes from Guenter Roeck: - gunyah_wdt: Re-enable the watchdog on resume - mediatek: Register reset controller before watchdog device - meson_gxbb_wdt: fix suspend/resume handling of HW_RUNNING watchdog - mtk_wdt: Stop a running watchdog over system sleep even if not opened - npcm: fix clock prepare leak when setting timeout on a running watchdog - omap: Fix early_enable handling in omap_wdt_probe() - orion_wdt: load the pretimeout counter on Armada 370/XP start - rzv2h: Drop runtime PM handling from WDTDCR init, and use pm_runtime_put_sync() - sbsa_gwdt: Limit the MediaTek WS0 race workaround to revision 0 - sc1200wdt: add missing MODULE_DEVICE_TABLE() - sp5100_tco: Use release_mem_region() for EFCH MMIO resource * tag 'watchdog-fixes-for-v7.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: watchdog: rzv2h: Drop runtime PM handling from WDTDCR init watchdog: rzv2h: Use pm_runtime_put_sync() watchdog: omap: Fix early_enable handling in omap_wdt_probe() watchdog: npcm: fix clock prepare leak when setting timeout on a running watchdog watchdog: gunyah_wdt: Re-enable the watchdog on resume watchdog: mediatek: Register reset controller before watchdog device watchdog: sp5100_tco: Use release_mem_region() for EFCH MMIO resource watchdog: sbsa_gwdt: Limit the MediaTek WS0 race workaround to revision 0 watchdog: meson_gxbb_wdt: fix suspend/resume handling of HW_RUNNING watchdog watchdog: mtk_wdt: Stop a running watchdog over system sleep even if not opened watchdog: orion_wdt: load the pretimeout counter on Armada 370/XP start watchdog: sc1200wdt: add missing MODULE_DEVICE_TABLE()
…m/kernel Pull drm fixes from Dave Airlie: "Weekly drm fixes, this is a bit bigger as we missed xe last week due to a tree screw up, so it's mostly xe and amdgpu, then the usual scattering of fixes across drivers. sched: - Ensure stopped entity cannot be re-added to the run-queue bridge: - ssd2825: Fix panel enable sequence - sii902x: validate I2S data lane values display: - hdmi: Fixes to SCDC i915: - Fix for PTL GitLab #9196: eDP-2 on DDI B ends up in a state where any enable fails - PSR fixes amdgpu: - DCN 6 DML2 fix - VCE fixes - GC 11.0.2 fix - SMU 15 fix - Error handling fixes - Partition fix - IMU firmware clean up fix - TLB fence handling fix amdkfd: - SVM fixes - CRIU fixes xe: - select configfs - Sync Wa_16023105232 in xe_was to match OOB rule - Program LMTT directory pointer from each GT init path - Demote uncorrectable local error log on CRI - Apply tile workarounds after PCODE init - VRAM offlining fixes - ras: Fix sysctrl and drm-ras discrepancy - pat: Return error from xe_pat_init_early() on unknown - Prevent VF memory IRQ from accessing a torn-down engine - guc: Protect timeout handling from device unplug - gt: Disable GT reset worker before engine teardown - Various hwmon fixes - tuning: Restrict Anyhit NULL-query tuning to render engines - gsc: Fix NVL-S GSC compatibility number - Don't abort the shrinker walk on -EBUSY - Mark xe_vma_ops_alloc() noinline for error injection - lrc: Restore CTX_CS_INDIRECT_CTX_OFFSET programming for pre-Xe2 - Fix build with DRM_XE=y and CONFIGFS_FS=m - madvise: use already clamped pat_index - Various wedging fixes - Rebind BOs evicted before the first LR queue - Toggle the D3Cold enable flag at runtime resume - Access GT MMIO after pcode init - xe_late_bind_fw: Fix firmware leak on missing manifest entry - svm: Preserve default PAT index when resetting VMA attributes - Unwrap sync fences before adding them as job dependencies - Schedule disable G2H fixes gud: - Avoid divide error in gud_stats_debugfs meson: - load ENCL gamma table while ENCL is disabled nouveau: - disp: Set atomic functions in struct drm_mode_config_funcs - gsp: Handle only IRQs routed to host panfrost: - Fixes to perfcnt vc4: - Fix firmware reference leak - Hold runtime PM reference while allocating the binner BO - Rebuild V3D interrupt mask on every power transition - Re-enable the V3D interrupt after a GPU reset" * tag 'drm-fixes-2026-11-14' of https://gitlab.freedesktop.org/drm/kernel: (81 commits) drm/vc4: Re-enable the V3D interrupt after a GPU reset drm/vc4: Rebuild the V3D interrupt mask on every power transition drm/vc4: Hold a runtime PM reference while allocating the binner BO drm: xe: select configfs drm/xe: Sync Wa_16023105232 in xe_was to match OOB rule drm/xe/pf: Program LMTT directory pointer from each GT's init path drm/xe/guc: Demote uncorrectable local error log on CRI drm/xe/pm: Apply tile workarounds after PCODE initialization drm/gud: avoid divide error in gud_stats_debugfs drm/nouveau/disp: Set drm_mode_config_funcs.atomic_(check|commit) (attempt 2) drm/amdgpu: fix TLB invalidation fence handling v4 drm/amdkfd: check CRIU SVM priv data bounds before allocating drm/amdgpu: release the IMU firmware with the other GFX microcode drm/amdgpu: Allow cancelling a requested NPS mode drm/amdgpu: fix the error handling of amdgpu_vm_init_entities() drm/amdgpu: use supported SMU clock messages on SMU 15.0.0 drm/amdkfd: skip GPUs without a VM when checkpointing the BO mappings drm/amdkfd: Acquire cwsr buffer during CRIU resume drm/amdkfd: Acquire buffers in CRIU queue restore (again) drm/amdgpu: Fix VCE buffer size check for DPB and input surface ...
…nel/git/jarkko/linux-tpmdd Pull key fixes from Jarkko Sakkinen: - Invoke the match callback before the state checks in keyring_search_iterator(), so that a non-matching revoked, expired or invalidated key cannot decide the search result - Take key->sem for reading around the ->asym_*() method calls in the keyctl pkey operations, as a key reference does not pin the module providing the key type * tag 'keys-v7.4-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: KEYS: Protect pkey method checks against type removal KEYS: do not let an unmatched key decide the search result
…ernel/git/linkinjeon/smb Pull smb server fixes from Namjae Jeon: - Evaluate explicit-access requests in DACL order with exact SID matching, and prevent guest and anonymous sessions from matching Authenticated Users - Apply Unix group and OWNER RIGHTS ACEs, and keep their denials when POSIX ACL fallback determines access - Allow the parent directory’s DACL to grant explicitly requested DELETE and FILE_READ_ATTRIBUTES through FILE_DELETE_CHILD and FILE_LIST_DIRECTORY - Exclude metadata-only file and stream opens from sharing conflicts and stream delete-sharing checks, while accounting for writes implied by overwrites and named-stream creation - Return STATUS_ACCESS_DENIED for reads on files lacking FMODE_READ, preventing warnings in __kernel_read() and potential panics - Pin parent dentries during SMB2 CREATE permission, status, and ACL inheritance operations to prevent use-after-free races with concurrent rename and removal - Keep expired sessions bound to their original user during NTLM reauthentication, preventing identity changes and a user-object leak * tag 'ksmbd-for-7.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/smb: ksmbd: keep group denials when a POSIX ACL entry decides access ksmbd: refuse reauthentication of an expired session as another user ksmbd: pin parent dentries in SMB2 CREATE ACL path ksmbd: let the parent's DACL grant DELETE and FILE_READ_ATTRIBUTES ksmbd: evaluate the DACL in order for explicit access requests ksmbd: skip metadata-only stream opens in the delete check ksmbd: skip metadata-only opens in sharing checks ksmbd: refuse to read a handle that is not open for reading ksmbd: grant a caller what its groups and OWNER RIGHTS ACEs allow
…rnel/git/linkinjeon/ntfs Pull ntfs fixes from Namjae Jeon: - Validate that $INDEX_ALLOCATION is open and non-resident before reading or writing index blocks, preventing NULL pointer dereferences when an earlier index operation has not opened it - Check that index allocation inodes are non-resident and child VCNs are non-negative and within bounds before directory lookup reads, preventing a deadlock when $INDEX_ALLOCATION is missing or damaged - Validate file names against the index entry's key length, preventing out-of-bounds reads when directory enumeration resumes using a copied key - Return -ENOENT for NTFS_IOC_LIST_STREAMS on deleted base files and fix unsigned underflow in its buffer bounds check, preventing out-of-bounds writes when the sizing and filling passes disagree - Use kfree() for the temporary runlist allocated with kmalloc() on merge failure, resolving the Coccinelle allocation/free mismatch warning * tag 'ntfs-for-7.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/ntfs: ntfs: open the index allocation before reading or writing an index block ntfs: do not read an index block outside $INDEX_ALLOCATION ntfs: silence kmalloc/kvfree mismatch warning ntfs: check the file name against the key length of an index entry ntfs: fix out-of-bounds write race in NTFS_IOC_LIST_STREAMS
…ernel/git/overlayfs/vfs Pull overlayfs fixes from Amir Goldstein: - Fixes for data-only layers (composefs), some for regressions from v6.16, which relaxed the requirements for redirects to data-only layers - Fix a use-after-free in lookup of a hardlink with a FUSE upper, reported by Sashiko - Fix a mount failure right after unmount of an overlay with the same upperdir - Reject lower layers on the same fs with different idmaps, which could decode file handles through the wrong layer - Minor fixes for a memory leak, an error message and readdir d_ino * tag 'ovl-fixes-7.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs: selftests: overlayfs: reject different lower idmaps on same fs ovl: reject different lower idmaps on the same fs ovl: bump the impure dir version when linking a file with origin ovl: return EIO if the lowerdata is missing ovl: follow lower to lowerdata redirects from any lower layer ovl: report the requested redirect_dir mode in conflicting options ovl: do not allow nfs_export with data-only layers ovl: do not check the deferred lowerdata redirect on index lookup ovl: fix leak of lowerdata redirect on ovl_get_inode() failure ovl: do not always clear absolute_redirect ovl: release the upperdir/workdir in-use locks before the umount sync ovl: do not read the flags of a put upper dentry in lookup
…kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Read tracking-mode voltage fault limits dynamically in the mp2975 PMBus driver instead of caching probe-time snapshots, avoiding false over-voltage alarms when CPU voltage changes at runtime. - Fix SCMI sensor probe by enabling supported sensors via firmware IDs before exposing channels and checking channel config allocations. - Fix runtime PM enable and reference count imbalances during probe and teardown in the gpio-fan driver. - Fix max31760 fan controller initialization and reporting, including leaving standby at probe, initial 0 RPM reporting, and swapped temperature limit registers. - Assorted minor sensor reading, interval clamping, and register handling fixes in other drivers. * tag 'hwmon-for-v7.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (aht10) Fix update_interval overflow on 64-bit hwmon: (scmi) Configure sensors before exposing channels hwmon: (scmi) Check channel config allocation hwmon: (nct6775) Handle dual use registers hwmon: (scmi) Enable temperature sensors using their sensor IDs hwmon: (pmbus/mp2975) Get vout fault limits dynamically hwmon: (sy7636a) fix negative temperatures hwmon: (max31760) Report 0 RPM before the first fan speed measurement hwmon: (max31760) Leave standby mode at probe hwmon: (max31760) Fix the local temperature limit registers hwmon: (gpio-fan) Fix runtime PM imbalance in probe and teardown
…nux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"A bunch of isolated fixes of Xen related drivers"
* tag 'for-linus-7.4a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
Xen/gnttab: improve error handling in gnttab_dma_{alloc,free}_pages()
xen: don't allow gnttab_dma_[alloc|free]_pages() in PV guest
xen/pvcalls: destroy the per-socket workqueue on release
xen/pvcalls: unwind pvcalls_new_active_socket() step by step
xen/privcmd: fix double free when an irqfd is shut down twice
xen/gntdev: fix deadlock between map ioctl and mmap
xen/platform-pci: Disable device before releasing PCI regions
xen/grant-table: annotate on-stack work in gnttab_unmap_refs_sync()
During LDT installation, the intent is to overwrite the old per-mm LDT value, then send an IPI to the mm user CPUs to have each load the new value. But there is an ordering problem: a new mm user CPU sets itself in mm_cpumask() and then reads mm->context.ldt. The LDT-installing CPU writes mm->context.ldt and then reads mm_cpumask(). But, there is nothing which orders the LDT installation side actions. The CPU can read mm_cpumask() before its write becomes visible. Ensure that new mm user CPUs see the new mm->context.ldt. Make mm->context.ldt visible before reading mm_cpumask(). Also convert the smp_store_release() over to a WRITE_ONCE(). smp_store_release() has an internal barrier which is weaker than the new smp_mb(). Avoid an extra barrier by converting it to WRITE_ONCE(). Also refresh/correct misleading comments. READ/WRITE_ONCE() do not "synchronize" anything themselves. Reported-by: Jaeyoung Chung <jjy600901@snu.ac.kr> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Jaeyoung Chung <jjy600901@snu.ac.kr> Acked-by: Linus Torvalds <torvalds@linuxfoundation.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@vger.kernel.org>
Memcg reclaim only relies on writeback throttling if writeback_throttling_sane() does. Since commit 97c9341 ("mm: vmscan: disable memcg direct reclaim stalling if cgroup writeback support is in use") that's the case if the memory controller is on the default hierarchy and CONFIG_CGROUP_WRITEBACK is set. Otherwise shrink_folio_list() sleeps in folio_wait_writeback() for a folio that is under writeback and already marked for reclaim if the allocation may enter the filesystem. CONFIG_CGROUP_WRITEBACK is enabled whenever CONFIG_MEMCG and CONFIG_BLK_CGROUP are. So with CONFIG_MEMCG=y and CONFIG_BLK_CGROUP=n memcg reclaim on cgroup v2 waits for writeback just like it does on cgroup v1. That wait can deadlock against freezing a filesystem. Loop takes freeze protection on the backing filesystem for its writes. A task in the middle of a write() to the backing filesystem holds freeze protection as well. If that task enters memcg reclaim it can end up waiting for writeback of a folio that belongs to a filesystem on the loop device. If a freeze of the backing filesystem is pending the loop worker blocks when it tries to write that folio out. And the freeze waits for the task in reclaim to drop its freeze protection. The same applies to other drivers that serve block I/O by writing to a file on a local filesystem and take freeze protection for it, e.g., the scsi target's fileio backend. Make CONFIG_MEMCG select CONFIG_BLK_CGROUP if CONFIG_BLOCK is set. Then CONFIG_CGROUP_WRITEBACK is always enabled together with memcg and memcg reclaim on cgroup v2 doesn't sleep in folio_wait_writeback() anymore. a Without CONFIG_BLOCK there are no block devices that could deadlock like this. Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org> Acked-by: Shakeel Butt <shakeel.butt@linux.dev> Signed-off-by: Tejun Heo <tj@kernel.org>
…/linux/kernel/git/trace/linux-trace Pull bootconfig fixes from Masami Hiramatsu: - bootconfig: Allow keys with the maximum supported depth Check the array capacity before storing the next key component in xbc_node_compose_key_after() so keys at XBC_DEPTH_MAX (16) are composed instead of failing with -ERANGE when listing keys or creating /proc/bootconfig. - bootconfig: Trim unquoted values at end of file Trim trailing whitespace from unquoted values in __xbc_parse_value() after scanning finishes so values at end of input without a trailing newline do not retain extra whitespace. - tools/bootconfig: Close only opened braces in compact output Check key children while skipping value nodes when backtracking in xbc_show_compact_tree() so a brace is not closed when a single subkey under a valued key was printed in dotted notation. - tools/bootconfig: Test listing keys at the maximum depth Add regression tests verifying that a 16-component key can be attached and listed in full while a 17-component key is rejected. * tag 'bootconfig-fixes-v7.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: bootconfig: Trim unquoted values at end of file tools/bootconfig: Close only opened braces in compact output tools/bootconfig: Test listing keys at the maximum depth bootconfig: Allow keys with the maximum supported depth
…ux/kernel/git/trace/linux-trace
Pull probe fixes from Masami Hiramatsu:
"Fix ftrace ops switching and optprobe state transitions:
- Switch an armed ftrace-based kprobe from kprobe_ftrace_ops to
kprobe_ipmodify_ops in register_aggr_kprobe() when adding a probe
with a post_handler, so later disarming does not fail with -ENOENT
and leave the probe armed
- Queue forcibly unoptimized probes onto the generation's
cooling_list in force_unoptimize_kprobe() so unregister_kprobes()
waits for Tasks RCU before freeing the optinsn slot, preventing a
use-after-free
- Skip arch_arm_kprobe() in __arm_kprobe() when a probe is queued for
unoptimization so the active relative jump instruction is not
partially overwritten with a breakpoint before the optimizer runs
- Re-queue any jump-optimized sibling probe covering a disabled
probe's address when that probe finishes cooling in
optprobe_finalize_generation(), matching the freeing_list path
Fix multiprobe lifecycle and boot kprobe setup
- Return early in setup_boot_kprobe_events() when the kprobe_event=
boot buffer is empty to avoid contending on event_mutex with
asynchronous eval-map work during normal boot
- Verify that a multiprobe event is neither enabled nor busy before
unlinking any sibling kprobe, fprobe, uprobe, or eprobe so active
probes cannot be unlinked and freed via dynamic_events
- Register and enable a newly appended fprobe or uprobe immediately
when the target multiprobe event is already enabled so the probe
fires and disable or perf cleanup does not act on an unregistered
probe
- Free the temporary event name string with __free(kfree) in
__trace_uprobe_create() to prevent a memory leak if a subsequent
allocation fails
Fix BTF parsing and string array fetch handling:
- Compute BTF bitfield byte and bit offsets consistently, select the
smallest unsigned fetch type covering the bitfield, and size
FETCH_OP_MOD_BF from that type to prevent an 8-byte out-of-bounds
write on smaller ring buffer slots
- Validate BTF_KIND_PTR and non-NULL BTF_KIND_INT types in
btf_type_is_char_ptr() and btf_type_is_char_array() before reading
inner type metadata to avoid misinterpreting byte sizes as type IDs
or reading out of bounds
- Check for FETCH_OP_UDEREF before advancing the fetch instruction
slot in finalize_fetch_insn() so user-space dereference string
arrays emit FETCH_OP_ST_USTRING instead of reading kernel memory
- Reject string array counts when the preceding fetch operation is
not a memory dereference so non-dereference string sources ($comm,
immediate strings, eprobe fields) do not emit invalid
FETCH_OP_LP_ARRAY loops
Fix signed 1-byte field fetch and fprobe target check:
- Use explicit fixed-width integer types (s8/u8, s16/u16, s32/u32) in
get_event_field() so 1-byte signed event fields are sign-extended
instead of zero-extended under -funsigned-char
- Exclude TRACE_EVENT_FL_FPROBE events in find_and_get_event() so
eprobes cannot attach to fprobe or tprobe events
Fix typo in kprobes documentation:
- Remove a stray closing parenthesis in Documentation/trace/kprobes.rst"
* tag 'probes-fixes-v7.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/uprobes: Fix memory leak of tail in __trace_uprobe_create()
tracing/probes: Reject array count on non-dereference string sources
tracing/probes: Fix user-space dereference string array store type
tracing/eprobe: Disallow attaching eprobes to fprobe events
tracing/eprobe: Fix 1-byte signed field fetch in get_event_field()
tracing/probes: Fix missing BTF kind checks in char pointer/array helpers
tracing/probes: Fix BTF bitfield parsing and out-of-bounds buffer write
tracing/probes: Enable newly appended probe when target event is enabled
tracing/probes: Check enabled and busy state before unlinking sibling probes
kprobes: Re-optimize blocked sibling probe when cooling finishes
kprobes: Do not overwrite jump instruction when re-arming unoptimizing probe
kprobes: Fix UAF and queue cooling probes on forced unoptimization
kprobes: Switch ftrace ops when adding probe with post_handler
docs, kprobes: Fix bracket
tracing: skip boot kprobe setup when no events were requested
…nux/kernel/git/liveupdate/linux Pull kexec MAINTAINERS update from Mike Rapoport: "Remove Dave Young as kdump reviewer" * tag 'kexec-fixes-2026-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux: Remove myself as a kdump reviewer
…rnel/git/liveupdate/linux Pull liveupdate fixes from Mike Rapoport: - avoid address translation in is_kho_boot() before the linear map is initialized, fixing early boot BUG_ONs on arm64 - check for duplicate session names before growing the sessions preservations block set to avoid preserving an empty block that causes restoration to panic() * tag 'fixes-2026-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux: kho: check fdt_phys in is_kho_boot() liveupdate: check for duplicate session before growing block set
…nux/kernel/git/tip/tip Pull core syscall fixes from Ingo Molnar: - Two generic syscall entry code fixes for return code data type definitions (Florian Bezdeka) * tag 'core-urgent-2026-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: entry: Complete syscall_enter_from_user_mode_work() to bool migration entry: Fix return type of syscall_trace_enter()
…nux/kernel/git/tip/tip Pull perf events fixes from Ingo Molnar: - Avoid AMD uncore context migration from non-owners (Sandipan Das) - Clear stop state in perf_trace_add(), to fix self-profilers such as async-profiler. Also fix a similar bug in hw_breakpoint_add() (Paolo Bertinetti) - Fix racy update of cpc->hrtimer_interval (Benjamin Segall) - Do not resurrect cpuctx->cgrp after last cgroup event exit, to fix UAF bug (Phat Dinh) * tag 'perf-urgent-2026-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Do not resurrect cpuctx->cgrp after last cgroup event exit perf: Fix racy update of cpc->hrtimer_interval perf/hw_breakpoint: Clear stop state in hw_breakpoint_add() tracing/perf: Clear stop state in perf_trace_add() perf/x86/amd/uncore: Avoid context migration from non-owners
…inux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: - Fix spurious SYS_sched_setattr() -EPERM for migration-disabled tasks (Andrea Parri) - Reject clamp values above SCHED_CAPACITY_SCALE (Andrea Parri) - Fix cpuset_mutex double unlock in __sched_setscheduler() (Andrea Parri) - Don't use fits_capacity() to compare thread and CPU counts in in invalid_llc_nr() (Zhan Xusheng) - Do not touch SMT siblings that have not joined the core yet during CPU onlining (Seiji Nishikawa) * tag 'sched-urgent-2026-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/core: Do not touch SMT siblings that have not joined the core yet sched/cache: Don't use fits_capacity() to compare thread and CPU counts sched/core: Fix cpuset_mutex double unlock in __sched_setscheduler() sched/uclamp: Reject clamp values above SCHED_CAPACITY_SCALE sched/deadline: Fix spurious -EPERM for migration-disabled tasks
…linux/kernel/git/tip/tip Pull timer fixes from Ingo Molnar:: - Add VDSO_UNALIGNED_PACKED config option for targets without efficient unaligned memory accesses (such as ARMv5), and turn it on for !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS platforms. Propagate these changes into tooling headers as well (Ian Rogers) - Read getboottime64() offsets under the tk_core.seq sequence counter (Hungyu Lin) - Keep tsacct task begin times stable across suspend (Hungyu Lin) - Reject cross timestamps for invalid AUX clocks (Avi Weiss) - Refresh auxiliary timekeeper base before offset validation (Avi Weiss) * tag 'timers-urgent-2026-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Refresh auxiliary base before offset validation timekeeping: Reject cross timestamps for invalid AUX clocks tsacct: Keep task begin times stable across suspend timekeeping: Read getboottime64() offsets under the sequence counter tools headers: Update the vdso/unaligned.h copy with the kernel sources vdso: Add VDSO_UNALIGNED_PACKED config option
…ux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: - Don't print reset reason in VMs, to fix Xen PV domU boot regression on AMD Zen CPUs (Jason Andryuk) - Preserve the default VGA fallback for legacy modes, to fix regression where a SeaBIOS QEMU guest with bochs and VKMS the boot VGA (bochs) loses its DRM boot_display attribute (Hengyu Liang) - Ensure write visibility during LDT installation (Dave Hansen) * tag 'x86-urgent-2026-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Ensure write visibility during LDT installation x86/video: Preserve the default VGA fallback for legacy modes x86/CPU/AMD: Don't print reset reason in VMs
rt5682_i2c_shutdown(), which is also the remove path, cancels jack_detect_work before jd_check_work. With a headset button held, jd_check_work can observe jack removal and queue jack_detect_work after the first cancel. That work can then run after the codec is reset or, on remove, after the driver data is freed. Use disable_delayed_work_sync() for both works, which can queue each other, to drain them and prevent requeueing. Probe initializes fresh work on rebind. Found by a static analysis tool under development. Fixes: 45a2702 ("ASoC: rt5682: Fix panic in rt5682_jack_detect_handler happening during system shutdown") Cc: stable@vger.kernel.org # v6.10+ Co-developed-by: Ijae Kim <ae878000@gmail.com> Signed-off-by: Ijae Kim <ae878000@gmail.com> Signed-off-by: Myeonghun Pak <mhun512@gmail.com> Link: https://patch.msgid.link/20261110043013.56937-1-mhun512@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
The cleanup in rt5659_remove() does not reset hs_jack, jack_type, or the component pointer, and does not mark the regmap cache dirty after the codec reset. On card rebind this leaves a dangling hs_jack pointer and causes regmap_update_bits() to skip re-programming jack-detection registers because the cache still holds the pre-reset values. Only clear headset detection state via rt5659_headset_detect() for JD3-mode jacks. In HDA header mode the SAR, 4BTN_IL, and IL_IRQ registers are set up once during I2C probe by rt5659_intel_hd_header_probe_setup() and are not re-enabled on card rebind, so clearing them in remove would leave mic detection disabled after the next bind. Reset the HDA IRQ polarity bits in RT5659_IRQ_CTRL_1 and RT5659_IRQ_CTRL_2 to their unplugged defaults before marking the regmap cache dirty. Without this, regcache_sync() on rebind restores plugged-in polarity while hda_hp_plugged and hda_mic_plugged are false, so the polarity-flip logic in rt5659_jack_detect_intel_hd_header() never fires and subsequent plug/unplug events do not generate an interrupt. If the I2C device unbinds without a card bound, rt5659_remove() is never called and the IRQ keeps queuing jack_detect_work until devres frees the private data. Register a devm action to disable the IRQ and cancel the delayed work on any I2C teardown path. Consolidate the IRQ disable and work cancellation into a shared helper that always sets irq_disabled, so that rt5659_remove(), rt5659_i2c_shutdown(), and the devm action all follow the same path and cannot double-disable the interrupt line. Store the I2C client pointer in rt5659_priv so all paths can reference it directly. Fixes: d3cb2de ("ASoC: rt5659: add rt5659 codec driver") Cc: stable@vger.kernel.org Signed-off-by: Tristan Madani <tristan@talencesecurity.com> Link: https://patch.msgid.link/20261110230603.2110759-1-tristan@talencesecurity.com Signed-off-by: Mark Brown <broonie@kernel.org>
remote_cpus_update() warns if the CPUs to be added to a remote partition intersect subpartitions_cpus, and then checks the very same condition right below to set PERR_NOCPUS and invalidate the partition: WARN_ON_ONCE(cpumask_intersects(tmp->addmask, subpartitions_cpus)); if (!capable(CAP_SYS_ADMIN)) WRITE_ONCE(cs->prs_err, PERR_ACCESS); else if (cpumask_intersects(tmp->addmask, subpartitions_cpus) || cpumask_subset(top_cpuset.effective_cpus, tmp->addmask)) WRITE_ONCE(cs->prs_err, PERR_NOCPUS); Sashiko reported that the warning could be triggered by a write to a cpuset control file, before the CAP_SYS_ADMIN check, which would panic a system with panic_on_warn set. The warning was added by commit 86888c7 ("cgroup/cpuset: Add warnings to catch inconsistency in exclusive CPUs") as an assertion that such CPUs have been filtered out before. No way to trigger it with the current interfaces has been found, as these CPUs are rejected when cpuset.cpus.exclusive is written. But the warning is redundant, as the conflict is handled right below anyway. Remove the warning and rely on the PERR_NOCPUS check, the same as remote_partition_enable() already does for this conflict. Reported-by: Sashiko <sashiko-bot@kernel.org> Link: https://sashiko.dev/#/patchset/20261114083124.1340140-1-ridong.chen%40linux.dev?part=6 Signed-off-by: Ridong Chen <chenridong@xiaomi.com> Reviewed-by: Waiman Long <longman@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
…otplug When a CPU hotplug leaves no CPU outside of the partitions for the top cpuset, cpuset_handle_hotplug() clears subpartitions_cpus and gives all the active CPUs back to the top cpuset. cpuset_hotplug_update_tasks() then walks the hierarchy and invalidates the partitions, as subpartitions_cpus is empty. However, an invalid partition visited in the same walk may be revived if its effective_xcpus is not empty. tasks_nocpu_error() doesn't catch it when its CPUs are all offline but it has no task. Its CPUs are put back into subpartitions_cpus, and the valid partitions visited after it are no longer invalidated, as subpartitions_cpus is not empty any more. The top cpuset is left with CPUs overlapping with these partitions. It can be reproduced on a system with 8 CPUs: # cd /sys/fs/cgroup # echo +cpuset > cgroup.subtree_control # mkdir A1 B1 # echo 1 > A1/cpuset.cpus # echo 1 > A1/cpuset.cpus.exclusive # echo 0,2-7 > B1/cpuset.cpus # echo root > B1/cpuset.cpus.partition # echo root > A1/cpuset.cpus.partition # cat A1/cpuset.cpus.partition root invalid (Parent unable to distribute cpu downstream) # echo 0 > /sys/devices/system/cpu/cpu1/online # cat A1/cpuset.cpus.partition B1/cpuset.cpus.partition root root # cat cpuset.cpus.effective 0,2-7 A1 can't take CPU 1, the last CPU of the root cgroup which has tasks. When CPU 1 is offlined, A1 is revived without any active CPU, and B1 stays valid while its CPUs are also in the effective CPUs of the root cgroup, which triggers WARNING: kernel/cgroup/cpuset.c:919 at rebuild_sched_domains_locked Only revive an invalid partition in hotplug if its effective_xcpus has an active CPU, the same as what is required to create a partition with tasks. With that, A1 and B1 are both invalidated in the above case. Fixes: 0c7f293 ("cgroup/cpuset: Add cpuset.cpus.exclusive.effective for v2") Cc: stable@vger.kernel.org # v6.7+ Reported-by: Sashiko <sashiko-bot@kernel.org> Link: https://sashiko.dev/#/patchset/20261114083124.1340140-1-ridong.chen%40linux.dev?part=11 Signed-off-by: Ridong Chen <chenridong@xiaomi.com> Reviewed-by: Waiman Long <longman@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
The AB8505 has a final gain stage in the handsfree speaker paths. On revision 2 and later, its HFLGainCtrl and HFRGainCtrl registers reset to 0x1f, which is the no-signal setting. The existing controls only reach the preceding DA3 and DA4 gain stage, so userspace cannot unmute the speaker outputs. Expose the handsfree output gain as an ALSA control. Select the combined revision 1 register or the separate revision 2 and later registers according to the detected chip revision. Signed-off-by: Linus Walleij <linusw@kernel.org> Link: https://patch.msgid.link/20261120-ux500-asoc-handsfree-gain-v1-1-56379df0a6d3@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
The LG gram 15 (15Z95U, AMD Ryzen AI 400 series, ACP 7.2) has the same audio design as the 16Z95U: RT713 on SoundWire link 0 and RT1320 on link 1, while the BIOS sets "acp-audio-config-flag" to 0x10 (FLAG_AMD_LEGACY_ONLY_DMIC). As on the 16Z95U, the flag makes snd_pci_ps bail out and no sound card is created. Add the machine to acp70_acpi_flag_override_table. The rt713 + rt1320 machine entries added for the 16Z95U then match. Tested by the reporter on an LG gram 15Z95U-H.AU87U1 with v7.4-rc3: internal speakers (correct left/right, no distortion up to full volume), internal microphones and the headset jack work, also after suspend/resume. Reported-by: Andy Pearson <stopthewar24@gmail.com> Closes: CachyOS/distribution#516 Tested-by: Andy Pearson <stopthewar24@gmail.com> Assisted-by: Claude:claude-opus-5-5 Signed-off-by: JaeHoon Kim <jaehoon1744@dankook.ac.kr> Link: https://patch.msgid.link/20261120143930.9662-1-jaehoon1744@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
Add device tree bindings documentation for the Nuvoton NAU83G10/20 audio amplifier. Signed-off-by: Neo Chang <YLCHANG2@nuvoton.com> Link: https://patch.msgid.link/20261118084214.527804-2-YLCHANG2@nuvoton.com Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the Nuvoton NAU83G10/20 audio amplifier. The NAU83G10 is a mono boost Class-D audio amplifier with integrated DSP and I/V-sense support. Signed-off-by: Neo Chang <YLCHANG2@nuvoton.com> Link: https://patch.msgid.link/20261118084214.527804-3-YLCHANG2@nuvoton.com Signed-off-by: Mark Brown <broonie@kernel.org>
Neo Chang <YLCHANG2@nuvoton.com> says: This patch series adds support for the Nuvoton NAU83G10 audio amplifier. The NAU83G10 is a mono boost Class-D audio amplifier with an integrated DSP and I/V-sense support. The driver supports I2C register access through regmap. DAPM widgets and routes, TDM interface configuration, and DSP firmware loading. The series is structured asd follows: - Patch 1: Adds the YAML device tree bindings documentation. - Patch 2: Adds the ASoC audio amplifier driver implementation. Link: https://patch.msgid.link/20261118084214.527804-1-YLCHANG2@nuvoton.com
When the calculated numerator is smaller than num_min, the function incorrectly sets it to num_max instead of num_min. This can produce an invalid interval by making the calculated minimum numerator larger than the maximum numerator, even when a valid range exists. Set the numerator to num_min when it falls below the minimum allowed value. This allows the function to calculate the correct lower bound and prevents valid intervals from being rejected. Signed-off-by: Sreeraj S Kurup <sreekuttan2156239@gmail.com> Link: https://patch.msgid.link/20261120113632.2761-1-sreekuttan2156239@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
Return errors directly and remove the now-redundant goto statements and the __err label. Also drop the unnecessary err = 0 initialization. While the current unbounded sprintf() works correctly, replace it with scnprintf() to bound the formatted string to the str buffer. No functional change. Signed-off-by: Thorsten Blum <blum@kernel.org> Link: https://patch.msgid.link/20261120115207.810114-2-blum@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
The input driver pcspkr and snd-pcsp both register a platform driver
named "pcspkr" for the platform device of the same name, and both
declare the module alias platform:pcspkr. With both built as modules,
as distribution configurations do, udev loads both for the device, and
the second one fails to register its driver on every boot. On a Dell
XPS 13 9310 with Linux 7.4-rc1 and the Debian configuration:
[ 0.793761] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 0.813617] Error: Driver 'pcspkr' is already registered, aborting...
Which driver ends up handling the beeps depends on the module load
order. The help text of SND_PCSP already says that the driver is not
needed for beeps, and that it may become the default sound card. Debian
therefore removes the alias since 2014 [1], and Ubuntu blacklists
snd_pcsp. With pcspkr built in, snd-pcsp cannot register its driver at
all, so the alias is useless there, too.
Only declare the alias if INPUT_PCSPKR is disabled. Then snd-pcsp is
loaded automatically and takes over the beeps as before. Otherwise only
pcspkr is loaded automatically, and users wanting PCM sound from the PC
speaker keep pcspkr from loading and load snd-pcsp explicitly, which is
already needed today for a deterministic result. Document it in the
Kconfig help text.
Tested on the Dell XPS 13 9310 with Linux 7.4-rc1 and the Debian
configuration (INPUT_PCSPKR=m, SND_PCSP=m), with snd-pcsp not
blacklisted: without this change, the error above is logged; with it,
only pcspkr is loaded and provides the PC Speaker input device, and after
`rmmod pcspkr`, `modprobe snd-pcsp` binds snd-pcsp and creates its sound
card. In QEMU with x86_64_defconfig, kvm_guest.config and SND_PCSP=m,
with systemd-udevd loading the modules, the same holds for
INPUT_PCSPKR=m, and with INPUT_PCSPKR=n, snd-pcsp is still loaded
automatically, binds the device, and creates its sound card and PC
Speaker input device.
[1]: https://bugs.debian.org/697709
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://patch.msgid.link/20261120120307.629996-1-pmenzel@molgen.mpg.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_parse_eld() checks that mnl bytes are available in the ELD buffer, but passes mnl + 1 as the source size to strscpy(). When the monitor name is not NUL-terminated and the buffer ends immediately after the mnl bytes, strscpy() may read beyond the provided buffer. Copy exactly mnl bytes and explicitly terminate the destination to avoid accessing a byte beyond the validated input length. Signed-off-by: Sreeraj S Kurup <sreekuttan2156239@gmail.com> Link: https://patch.msgid.link/20261120124607.2799-1-sreekuttan2156239@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
Silly add/add nonsense in the ACPI tables.
The HPR mixer connects both DMIC2 inputs to DMIC2L Switch. The control for the right input is DMIC2R Switch and uses its own register bit. As a result, toggling DMIC2R Switch does not update the right input's DAPM path. Associate DMIC2 Right with DMIC2R Switch, as in the other mixers. Fixes: dbf7a73 ("ASoC: Support TI LM49453 Audio driver") Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com> Link: https://patch.msgid.link/20261119075728.50125-1-zhujun2@cmss.chinamobile.com Signed-off-by: Mark Brown <broonie@kernel.org>
…sters Add a test case to check that the ASP config and input mixer registers are not written when the ASP DAI is not part of a DAI link. This is to test the fixes made in commit 0085428 ("ASoC: cs35l56: Only write ASP1TXn registers when widget is powered-up"). These registers have multiple owners, so the driver must not write to them if it doesn't own them. A write can be inadvertently caused by reading a register, which populates the value in the cache, then doing a regcache_sync() of a dirty cache. The test includes testing direct writes during probe, and writes during a subsequent cache-sync. Some mock infrastructure is needed to enable this: 1. The test must supply dummy regulators. The automatic provision of dummy regulators by the regulator framework is a system-level decision, not a Kconfig flag that can be depended on. Not all systems can be relied on to supply dummy regulators automatically. 2. A simple simulation of a set of chip registers is done by a regmap that is always in cache-only mode. Around this is a small regmap bus wrapper. The simulated ASP registers are pre-populated with zero so that they are readable. The order of creating struct cs35l56_priv and the faux device had to be swapped in cs35l56_test_case_init_common() to ensure that devm cleanup of the faux device happens before the cs35l56_priv data is freed by KUnit. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://patch.msgid.link/20261117154700.840631-2-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
…ites Add some test cases to check that ASP config registers are not written if the driver doesn't own them. This is to test the fixes made in commit 396c5d8 ("ASoC: cs35l56: Fix unwanted writes to ASP config registers"). These registers have multiple owners, so the driver must not write to them if it doesn't own them. - If cs35l56_set_asp_defaults() has not been called there must not be any writes to them during a regcache_sync(). - If cs35l56_set_asp_defaults() has been called they must be written out by a regcache_sync(). - If cs35l56_set_asp_defaults() is called while the regmap is in cache-only mode it must not attempt to write to the hardware. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://patch.msgid.link/20261117154700.840631-3-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
Richard Fitzgerald <rf@opensource.cirrus.com> says: These two patches are correctness/regression tests for the fixes made by the previous commits: commit 0085428 ("ASoC: cs35l56: Only write ASP1TXn registers when widget is powered-up") commit 396c5d8 ("ASoC: cs35l56: Fix unwanted writes to ASP config registers") Link: https://patch.msgid.link/20261117154700.840631-1-rf@opensource.cirrus.com
bardliao
requested review from
dbaluta,
kv2019i,
lgirdwood,
plbossart,
ranj063 and
ujfalusi
as code owners
November 22, 2026 09:20
There was a problem hiding this comment.
🔵 Needs a closer look
The cross-subsystem merge changes critical architecture, memory-management, filesystem, and networking contracts, requiring maintainer integration review and configuration and hardware validation unavailable in this snapshot.
No open issues 🎉
What changed in this PR
Synchronizes the kernel tree with upstream, advancing the release marker to 7.4-rc3. The merge includes sound updates alongside broader driver, filesystem, networking, and memory-management changes.
Changes:
- Converts allocations across drivers and core code to object, array, and flexible-array helpers.
- Imports targeted fixes for error handling, resource lifetime, synchronization, and accounting.
- Updates internal interfaces, configuration dependencies, selftests, and architecture support.
| File | Description |
|---|---|
tools/testing/vma/include/stubs.h |
Make the VMA lock assertion parameter const. |
tools/testing/selftests/ublk/Makefile |
Enable 64-bit file offsets. |
tools/testing/selftests/net/config |
Enable NSH support for networking tests. |
tools/testing/selftests/mm/khugepaged_race.c |
Include Linux memory-mapping definitions. |
tools/testing/selftests/drivers/net/hw/config |
Enable TLS and device offload support. |
tools/testing/selftests/drivers/net/hw/.gitignore |
Ignore the TLS offload test binary. |
tools/bootconfig/samples/exp-good-mixed-kv1.bconf |
Extend the mixed key/value sample. |
sound/usb/usx2y/usbusx2y.h |
Track pending URB completions. |
sound/usb/format.c |
Use a zeroed-array allocation helper. |
sound/soc/spear/spdif_out.c |
Use managed object allocation. |
sound/soc/spear/spdif_in.c |
Use managed object allocation. |
sound/soc/samsung/snow.c |
Use managed object allocation. |
sound/soc/qcom/storm.c |
Use managed object allocation. |
sound/soc/qcom/sc7280.c |
Use managed object allocation. |
sound/soc/qcom/qaif-platform.c |
Use an object allocation helper. |
sound/soc/generic/simple-card.c |
Use managed object allocation. |
sound/soc/codecs/tas5720.c |
Use managed object allocation. |
sound/soc/codecs/tas2562.c |
Use managed object allocation. |
sound/soc/codecs/simple-mux.c |
Use managed object allocation. |
sound/soc/codecs/pcm3060.h |
Remove the codec removal declaration. |
sound/soc/codecs/pcm1754.c |
Use managed object allocation. |
sound/soc/codecs/max9759.c |
Use managed object allocation. |
sound/soc/codecs/jz4770.c |
Use managed object allocation. |
sound/soc/codecs/jz4760.c |
Use managed object allocation. |
sound/soc/codecs/ak5386.c |
Use managed object allocation. |
sound/soc/amd/acp/Kconfig |
Select the ACPI sound helper unconditionally. |
sound/pci/Kconfig |
Select PCM support for Audiowerk 2. |
sound/drivers/serial-u16550.c |
Use managed object allocation. |
sound/core/pcm_lib.c |
Correct the rational interval minimum clamp. |
security/keys/keyctl.c |
Remove the local description-size definition. |
security/apparmor/policy_unpack.c |
Use a zeroed-array allocation helper. |
rust/kernel/io/resource.rs |
Construct resource flags through from_raw. |
net/qrtr/smd.c |
Use managed object allocation. |
net/nfc/nci/spi.c |
Use managed object allocation. |
net/netfilter/nft_fwd_netdev.c |
Include Netfilter recursion definitions. |
net/netfilter/nf_tables_offload.c |
Allow destruction of a null flow rule. |
net/netfilter/nf_flow_table_core.c |
Extend offloaded GRE connection timeouts. |
net/netfilter/ipvs/ip_vs_app.c |
Defer application freeing through RCU. |
net/ipv4/esp4_offload.c |
Invalidate cached GRO fragment data before pulling. |
net/dsa/conduit.c |
Use managed object allocation. |
net/can/af_can.h |
Replace receiver identification text with an inode number. |
net/bridge/br_vlan.c |
Use flexible-array allocation. |
net/batman-adv/tp_meter.c |
Widen the byte counter to 64 bits. |
net/9p/client.c |
Reject error replies carrying a zero error. |
mm/vmalloc.c |
Use an array allocation helper. |
mm/vma_init.c |
Assert write locking before duplicating a VMA. |
mm/slub.c |
Use a zeroed-array allocation helper. |
mm/slab_common.c |
Use an array helper with explicit allocation flags. |
mm/shrinker_debug.c |
Use a zeroed-array allocation helper. |
mm/nommu.c |
Require the caller to hold the mmap write lock. |
mm/mm_init.c |
Remove explicit page-tag reference clearing. |
Makefile |
Advance the release marker to 7.4-rc3. |
lib/test_bitops.c |
Use an array allocation helper. |
lib/argv_split.c |
Use an array helper with explicit allocation flags. |
kernel/trace/trace.c |
Use an object allocation helper. |
kernel/panic.c |
Zero-initialize the taint string buffer. |
kernel/module/kmod.c |
Use an array allocation helper. |
kernel/liveupdate/kexec_handover.c |
Detect handover boot from the physical FDT address. |
kernel/dma/map_benchmark.c |
Use managed object allocation. |
kernel/bpf/diagnostics.h |
Add a slice-buffer modification diagnostic reason. |
io_uring/dma-buf.c |
Use an object allocation helper. |
io_uring/cancel.c |
Account for cancellation helpers returning multiple cancellations. |
init/Kconfig |
Select block cgroups when memory cgroups require them. |
include/net/tls.h |
Add an empty-record run counter. |
include/net/netfilter/nf_queue.h |
Preserve packet-duplication state in queue entries. |
include/net/net_namespace.h |
Track pending network-device unregister operations. |
include/net/bluetooth/l2cap.h |
Add an enhanced-credit reconfiguration request flag. |
include/linux/stat.h |
Define the kernel-private statx attribute mask. |
include/linux/sched.h |
Track the CPU charged for I/O waiting. |
include/linux/dcache.h |
Consolidate dentry name snapshots into a boolean-returning API. |
include/linux/can/dev.h |
Free invalid transmit packets safely across contexts. |
include/drm/drm_kunit_helpers.h |
Use managed object allocation. |
include/acpi/acpi_bus.h |
Track pending physical-node offlining. |
fs/xfs/xfs_sysfs.c |
Correct the sysfs initialization cleanup target. |
fs/xfs/xfs_healthmon.c |
Initialize the mount cookie before RCU publication. |
fs/xfs/xfs_export.c |
Adapt to the inode log-force interface. |
fs/smb/server/vfs_cache.h |
Track writes implied by file opening. |
fs/proc/internal.h |
Add an RCU-based VMA iterator. |
fs/proc/base.c |
Use an array allocation helper. |
fs/overlayfs/params.h |
Declare redirect-mode helpers. |
fs/open.c |
Export dentry_open_nonotify for GPL modules. |
fs/notify/fsnotify.c |
Widen pre-content notification lengths to 64 bits. |
fs/nilfs2/iomap.h |
Declare the iomap iterator callback. |
fs/nilfs2/iomap.c |
Define the iomap iterator callback. |
fs/internal.h |
Remove the iomap operations forward declaration. |
fs/gfs2/bmap.h |
Declare the iomap iterator callback. |
fs/fuse/fuse_dev_i.h |
Remove the folio-moving state flag. |
fs/fuse/args.h |
Remove the page-replacement argument flag. |
fs/ext2/dir.c |
Limit synchronous directory flushing to dirsync inodes. |
fs/debugfs/file.c |
Use managed object allocation. |
fs/ceph/file.c |
Use the allocation helper’s default flags. |
fs/btrfs/verity.c |
Propagate errors from verity initialization. |
fs/9p/fid.c |
Use an array allocation helper. |
fs/9p/acl.h |
Correct the closing include-guard comment. |
drivers/xen/grant-dma-ops.c |
Use managed object allocation. |
drivers/xen/gntalloc.c |
Use a zeroed-array allocation helper. |
drivers/watchdog/xilinx_wwdt.c |
Use managed object allocation. |
drivers/watchdog/visconti_wdt.c |
Use managed object allocation. |
drivers/watchdog/uniphier_wdt.c |
Use managed object allocation. |
drivers/watchdog/ts72xx_wdt.c |
Use managed object allocation. |
drivers/watchdog/tqmx86_wdt.c |
Use managed object allocation. |
drivers/watchdog/sunplus_wdt.c |
Use managed object allocation. |
drivers/watchdog/sprd_wdt.c |
Use managed object allocation. |
drivers/watchdog/s32g_wdt.c |
Use managed object allocation. |
drivers/watchdog/rzn1_wdt.c |
Use managed object allocation. |
drivers/watchdog/rzg2l_wdt.c |
Use managed object allocation. |
drivers/watchdog/rza_wdt.c |
Use managed object allocation. |
drivers/watchdog/rti_wdt.c |
Use managed object allocation. |
drivers/watchdog/riowd.c |
Use managed object allocation. |
drivers/watchdog/renesas_wwdt.c |
Use managed object allocation. |
drivers/watchdog/renesas_wdt.c |
Use managed object allocation. |
drivers/watchdog/qcom-wdt.c |
Use managed object allocation. |
drivers/watchdog/pseries-wdt.c |
Use managed object allocation. |
drivers/watchdog/mena21_wdt.c |
Use managed object allocation. |
drivers/watchdog/max77620_wdt.c |
Use managed object allocation. |
drivers/watchdog/lantiq_wdt.c |
Use managed object allocation. |
drivers/watchdog/iTCO_wdt.c |
Use managed object allocation. |
drivers/watchdog/intel-mid_wdt.c |
Use managed object allocation. |
drivers/watchdog/imx2_wdt.c |
Use managed object allocation. |
drivers/watchdog/i6300esb.c |
Use managed object allocation. |
drivers/watchdog/gxp-wdt.c |
Use managed object allocation. |
drivers/watchdog/gpio_wdt.c |
Use managed object allocation. |
drivers/watchdog/f71808e_wdt.c |
Use managed object allocation. |
drivers/watchdog/ep93xx_wdt.c |
Use managed object allocation. |
drivers/watchdog/cpwd.c |
Use managed object allocation. |
drivers/watchdog/bd9576_wdt.c |
Use managed object allocation. |
drivers/watchdog/aspeed_wdt.c |
Use managed object allocation. |
drivers/watchdog/apple_wdt.c |
Use managed object allocation. |
drivers/virt/vmgenid.c |
Use managed object allocation. |
drivers/video/backlight/sy7758.c |
Use managed object allocation. |
drivers/video/backlight/platform_lcd.c |
Use managed object allocation. |
drivers/video/backlight/pandora_bl.c |
Use managed object allocation. |
drivers/video/backlight/ili922x.c |
Use managed object allocation. |
drivers/video/backlight/bd6107.c |
Use managed object allocation. |
drivers/video/backlight/aw99706.c |
Use managed object allocation. |
drivers/video/aperture.c |
Use managed object allocation. |
drivers/usb/serial/f81232.c |
Use managed object allocation. |
drivers/usb/renesas_usbhs/common.c |
Use managed object allocation. |
drivers/usb/chipidea/core.c |
Use managed object allocation. |
drivers/usb/cdns3/core.c |
Use managed object allocation. |
drivers/uio/uio_netx.c |
Use managed object allocation. |
drivers/uio/uio_cif.c |
Use managed object allocation. |
drivers/thermal/thermal_mmio.c |
Use managed object allocation. |
drivers/thermal/st/stm_thermal.c |
Use managed object allocation. |
drivers/thermal/st/st_thermal.c |
Use managed object allocation. |
drivers/thermal/spear_thermal.c |
Use managed object allocation. |
drivers/thermal/imx_thermal.c |
Use managed object allocation. |
drivers/thermal/dove_thermal.c |
Use managed object allocation. |
drivers/thermal/amlogic_thermal.c |
Use managed object allocation. |
drivers/staging/nvec/nvec.c |
Use managed object allocation. |
drivers/ssb/sdio.c |
Remove an email address from a copyright comment. |
drivers/ssb/main.c |
Remove an email address from a copyright comment. |
drivers/ssb/host_soc.c |
Remove an email address from a copyright comment. |
drivers/ssb/driver_gige.c |
Remove an email address from a copyright comment. |
drivers/spi/spi-xlp.c |
Use managed object allocation. |
drivers/spi/spi-slave-time.c |
Use managed object allocation. |
drivers/spi/spi-pl022.c |
Use managed object allocation. |
drivers/spi/spi-fsi.c |
Use managed object allocation. |
drivers/soc/qcom/socinfo.c |
Use managed object allocation. |
drivers/soc/qcom/rpm_master_stats.c |
Use managed array allocation. |
drivers/soc/qcom/ice.c |
Use managed object allocation. |
drivers/soc/qcom/apr.c |
Use managed object allocation. |
drivers/soc/fsl/rcpm.c |
Use managed object allocation. |
drivers/soc/fsl/qe/tsa.c |
Use managed object allocation. |
drivers/soc/atmel/sfr.c |
Use managed object allocation. |
drivers/soc/apple/sart.c |
Use managed object allocation. |
drivers/soc/apple/mailbox.c |
Use managed object allocation. |
drivers/scsi/scsi_debug.c |
Wait for asynchronous work during module exit. |
drivers/scsi/libsas/sas_ata.c |
Add printf-format checking to the logging helper. |
drivers/scsi/aha1542.c |
Remove command DMA unmapping from cleanup. |
drivers/s390/block/dasd_alias.c |
Use the corrected sleep-helper name. |
drivers/rtc/rtc-tps6594.c |
Use managed object allocation. |
drivers/rtc/rtc-test.c |
Use managed object allocation. |
drivers/rtc/rtc-tegra.c |
Use managed object allocation. |
drivers/rtc/rtc-spear.c |
Use managed object allocation. |
drivers/rtc/rtc-snvs.c |
Use managed object allocation. |
drivers/rtc/rtc-sh.c |
Use managed object allocation. |
drivers/rtc/rtc-s32g.c |
Use managed object allocation. |
drivers/rtc/rtc-rzn1.c |
Use managed object allocation. |
drivers/rtc/rtc-r7301.c |
Use managed object allocation. |
drivers/rtc/rtc-optee.c |
Use managed object allocation. |
drivers/rtc/rtc-omap.c |
Use managed object allocation. |
drivers/rtc/rtc-mxc.c |
Use managed object allocation. |
drivers/rtc/rtc-mv.c |
Use managed object allocation. |
drivers/rtc/rtc-meson.c |
Use managed object allocation. |
drivers/rtc/rtc-gamecube.c |
Use managed object allocation. |
drivers/rtc/rtc-ds1742.c |
Use managed object allocation. |
drivers/rtc/rtc-cpcap.c |
Use managed object allocation. |
drivers/rtc/rtc-amlogic-a4.c |
Use managed object allocation. |
drivers/rtc/rtc-ab-eoz9.c |
Use managed object allocation. |
drivers/reset/reset-zynqmp.c |
Use managed object allocation. |
drivers/reset/reset-zynq.c |
Use managed object allocation. |
drivers/reset/reset-uniphier.c |
Use managed object allocation. |
drivers/reset/reset-uniphier-glue.c |
Use managed object allocation. |
drivers/reset/reset-tn48m.c |
Use managed object allocation. |
drivers/reset/reset-th1520.c |
Use managed object allocation. |
drivers/reset/reset-sunplus.c |
Use managed object allocation. |
drivers/reset/reset-simple.c |
Use managed object allocation. |
drivers/reset/reset-scmi.c |
Use managed object allocation. |
drivers/reset/reset-raspberrypi.c |
Use managed object allocation. |
drivers/reset/reset-qcom-pdc.c |
Use managed object allocation. |
drivers/reset/reset-qcom-aoss.c |
Use managed object allocation. |
drivers/reset/reset-npcm.c |
Use managed object allocation. |
drivers/reset/reset-ma35d1.c |
Use managed object allocation. |
drivers/reset/reset-lpc18xx.c |
Use managed object allocation. |
drivers/reset/reset-lantiq.c |
Use managed object allocation. |
drivers/reset/reset-k230.c |
Use managed object allocation. |
drivers/reset/reset-k210.c |
Use managed object allocation. |
drivers/reset/reset-intel-gw.c |
Use managed object allocation. |
drivers/reset/reset-imx-scu.c |
Use managed object allocation. |
drivers/reset/reset-hsdk.c |
Use managed object allocation. |
drivers/reset/reset-gpio.c |
Use managed object allocation. |
drivers/reset/reset-eyeq.c |
Use managed object allocation. |
drivers/reset/reset-eic7700.c |
Use managed object allocation. |
drivers/reset/reset-brcmstb.c |
Use managed object allocation. |
drivers/reset/reset-berlin.c |
Use managed object allocation. |
drivers/reset/reset-axs10x.c |
Use managed object allocation. |
drivers/reset/reset-aspeed.c |
Use managed object allocation. |
drivers/reset/amlogic/reset-meson-common.c |
Use managed object allocation. |
drivers/regulator/virtual.c |
Use managed object allocation. |
drivers/regulator/vexpress-regulator.c |
Use managed object allocation. |
drivers/regulator/uniphier-regulator.c |
Use managed object allocation. |
drivers/regulator/tps68470-regulator.c |
Use managed object allocation. |
drivers/regulator/tps65185.c |
Use managed object allocation. |
drivers/regulator/rt8092.c |
Use managed object allocation. |
drivers/regulator/rt6190-regulator.c |
Use managed object allocation. |
drivers/regulator/rt5739.c |
Use managed object allocation. |
drivers/regulator/rt4803.c |
Use managed object allocation. |
drivers/regulator/pbias-regulator.c |
Use managed array allocation. |
drivers/regulator/of_regulator.c |
Use managed object allocation. |
drivers/regulator/mp886x.c |
Use managed object allocation. |
drivers/regulator/mcp16502.c |
Use managed object allocation. |
drivers/regulator/max77620-regulator.c |
Use managed object allocation. |
drivers/regulator/lp872x.c |
Use managed object allocation. |
drivers/regulator/Kconfig |
Select MMIO regmap support for Qualcomm SPMI. |
drivers/regulator/irq_helpers.c |
Use managed object allocation. |
drivers/regulator/fp9931.c |
Use managed object allocation. |
drivers/regulator/anatop-regulator.c |
Use managed object allocation. |
drivers/ras/amd/fmpm.c |
Use a zeroed-array allocation helper. |
drivers/ptp/ptp_vmclock.c |
Use managed object allocation. |
drivers/ptp/ptp_netc.c |
Use managed object allocation. |
drivers/power/supply/cros_charge-control.c |
Use managed object allocation. |
drivers/power/reset/xgene-reboot.c |
Use managed object allocation. |
drivers/power/reset/syscon-reboot.c |
Use managed object allocation. |
drivers/power/reset/syscon-poweroff.c |
Use managed object allocation. |
drivers/power/reset/qcom-pon.c |
Use managed object allocation. |
drivers/power/reset/pwr-mlxbf.c |
Use managed object allocation. |
drivers/platform/x86/xo15-ebook.c |
Use managed object allocation. |
drivers/platform/x86/quickstart.c |
Use managed object allocation. |
drivers/platform/x86/adv_swbutton.c |
Use managed object allocation. |
drivers/platform/surface/surface3_power.c |
Use managed object allocation. |
drivers/platform/surface/surface_gpe.c |
Use managed object allocation. |
drivers/platform/surface/surface_acpi_notify.c |
Use managed object allocation. |
drivers/platform/chrome/cros_usbpd_logger.c |
Use managed object allocation. |
drivers/platform/chrome/cros_ec.c |
Use managed object allocation. |
drivers/platform/arm64/Kconfig |
Remove the ASUS Glymur thermal dependency constraint. |
drivers/pinctrl/core.c |
Use managed object allocation. |
drivers/phy/phy-lgm-usb.c |
Use managed object allocation. |
drivers/peci/cpu.c |
Use managed object allocation. |
drivers/pci/pwrctrl/generic.c |
Use managed object allocation. |
drivers/pci/of.c |
Use managed object allocation. |
drivers/pci/of_property.c |
Use a zeroed-array allocation helper. |
drivers/pci/controller/pci-xgene.c |
Use managed object allocation. |
drivers/parport/parport_serial.c |
Use managed object allocation. |
drivers/parisc/led.c |
Use managed object allocation. |
drivers/of/unittest.c |
Use managed object allocation. |
drivers/nvmem/stm32-romem.c |
Use managed object allocation. |
drivers/nvmem/snvs_lpgpr.c |
Use managed object allocation. |
drivers/nvmem/sec-qfprom.c |
Use managed object allocation. |
drivers/nvmem/rmem.c |
Use managed object allocation. |
drivers/nvmem/qfprom.c |
Use managed object allocation. |
drivers/nvmem/nintendo-otp.c |
Use managed object allocation. |
drivers/nvmem/mxs-ocotp.c |
Use managed object allocation. |
drivers/nvmem/bcm-ocotp.c |
Use managed object allocation. |
drivers/nvmem/at25.c |
Use managed object allocation. |
drivers/nvmem/apple-efuses.c |
Use managed object allocation. |
drivers/nvme/common/keyring.c |
Release the reference to a revoked TLS key. |
drivers/nvdimm/pmem.c |
Use managed object allocation. |
drivers/nfc/port100.c |
Use managed object allocation. |
drivers/net/xen-netback/interface.c |
Stop freeing multicast state during data disconnect. |
drivers/net/wireless/broadcom/b43legacy/sysfs.c |
Remove an email address from a copyright comment. |
drivers/net/wireless/broadcom/b43legacy/pio.c |
Remove an email address from a copyright comment. |
drivers/net/wireless/broadcom/b43/sysfs.c |
Remove an email address from a copyright comment. |
drivers/net/wireless/broadcom/b43/pio.c |
Remove an email address from a copyright comment. |
drivers/net/phy/xpowers/ac200.c |
Use managed object allocation. |
drivers/net/phy/smsc.c |
Use managed object allocation. |
drivers/net/phy/mxl-gpy.c |
Use managed object allocation. |
drivers/net/phy/motorcomm.c |
Use managed object allocation. |
drivers/net/phy/microchip.c |
Use managed object allocation. |
drivers/net/phy/icplus.c |
Use managed object allocation. |
drivers/net/phy/adin.c |
Use managed object allocation. |
drivers/net/ethernet/jme.h |
Add a Wake-on-LAN quiesce flag. |
drivers/mtd/maps/int0800.c |
Use managed object allocation. |
drivers/mtd/devices/powernv_flash.c |
Use managed object allocation. |
drivers/mmc/core/host.c |
Use a zeroed-array allocation helper. |
drivers/misc/open-dice.c |
Use managed object allocation. |
drivers/misc/nsm.c |
Use managed object allocation. |
drivers/mfd/tps65219.c |
Use managed object allocation. |
drivers/mfd/tps65218.c |
Use managed object allocation. |
drivers/mfd/tps65086.c |
Use managed object allocation. |
drivers/mfd/ti-lmu.c |
Use managed object allocation. |
drivers/mfd/stmfx.c |
Use managed object allocation. |
drivers/mfd/stm32-timers.c |
Use managed object allocation. |
drivers/mfd/ssbi.c |
Use managed object allocation. |
drivers/mfd/sky81452.c |
Use managed object allocation. |
drivers/mfd/rave-sp.c |
Use managed object allocation. |
drivers/mfd/qnap-mcu.c |
Use managed object allocation. |
drivers/mfd/qcom_rpm.c |
Use managed object allocation. |
drivers/mfd/ntxec.c |
Use managed object allocation. |
drivers/mfd/mt6370.c |
Use managed object allocation. |
drivers/mfd/mp2629.c |
Use managed object allocation. |
drivers/mfd/max77759.c |
Use managed object allocation. |
drivers/mfd/max77705.c |
Use managed object allocation. |
drivers/mfd/max77620.c |
Use managed object allocation. |
drivers/mfd/madera-spi.c |
Use managed object allocation. |
drivers/mfd/macsmc.c |
Use managed object allocation. |
drivers/mfd/lpc_sch.c |
Use managed object allocation. |
drivers/mfd/lp873x.c |
Use managed object allocation. |
drivers/mfd/loongson-se.c |
Use managed object allocation. |
drivers/mfd/kempld-core.c |
Use managed object allocation. |
drivers/mfd/ipaq-micro.c |
Use managed object allocation. |
drivers/mfd/gateworks-gsc.c |
Use managed object allocation. |
drivers/mfd/exynos-lpass.c |
Use managed object allocation. |
drivers/mfd/dln2.c |
Use managed object allocation. |
drivers/mfd/adp5520.c |
Use managed object allocation. |
drivers/mfd/ac100.c |
Use managed object allocation. |
drivers/mfd/88pm886.c |
Use managed object allocation. |
drivers/memstick/core/memstick.c |
Leave driver-pointer clearing to the driver core. |
drivers/memory/stm32_omm.c |
Use managed object allocation. |
drivers/memory/renesas-rpc-if.c |
Use managed object allocation. |
drivers/memory/dfl-emif.c |
Use managed object allocation. |
drivers/memory/brcmstb_dpfe.c |
Use managed object allocation. |
drivers/media/rc/winbond-cir.c |
Use an array allocation helper. |
drivers/media/rc/st_rc.c |
Use managed object allocation. |
drivers/media/platform/ti/cal/cal.c |
Use managed object allocation. |
drivers/media/i2c/st-mipid02.c |
Use managed object allocation. |
drivers/md/dm-zone.c |
Reject zone-report calls that make no progress. |
drivers/md/dm-clone-target.c |
Use a zeroed-array allocation helper. |
drivers/mcb/mcb-lpc.c |
Use managed object allocation. |
drivers/mailbox/sprd-mailbox.c |
Use managed object allocation. |
drivers/mailbox/platform_mhu.c |
Use managed object allocation. |
drivers/mailbox/imx-mailbox.c |
Use managed object allocation. |
drivers/mailbox/cix-mailbox.c |
Use managed object allocation. |
drivers/leds/leds-regulator.c |
Use managed object allocation. |
drivers/leds/led-core.c |
Use a zeroed-array allocation helper. |
drivers/irqchip/irq-keystone.c |
Use managed object allocation. |
drivers/input/touchscreen/zet6223.c |
Use managed object allocation. |
drivers/input/touchscreen/st1232.c |
Use managed object allocation. |
drivers/input/touchscreen/silead.c |
Use managed object allocation. |
drivers/input/touchscreen/imagis.c |
Use managed object allocation. |
drivers/input/touchscreen/apple_z2.c |
Use managed object allocation. |
drivers/input/touchscreen/ad7879.c |
Use managed object allocation. |
drivers/input/touchscreen/ad7877.c |
Use managed object allocation. |
drivers/input/mouse/gpio_mouse.c |
Use managed object allocation. |
drivers/input/misc/rb532_button.c |
Use managed object allocation. |
drivers/input/misc/pwm-beeper.c |
Use managed object allocation. |
drivers/input/misc/isa1200.c |
Use managed object allocation. |
drivers/input/misc/ibm-panel.c |
Use managed object allocation. |
drivers/input/misc/gpio_decoder.c |
Use managed object allocation. |
drivers/input/keyboard/qt1050.c |
Use managed object allocation. |
drivers/input/keyboard/lm8323.c |
Use managed object allocation. |
drivers/input/keyboard/imx_sc_key.c |
Use managed object allocation. |
drivers/hwmon/yogafan.c |
Use managed object allocation. |
drivers/hwmon/tps23861.c |
Use managed object allocation. |
drivers/hwmon/tmp513.c |
Use managed object allocation. |
drivers/hwmon/tmp421.c |
Use managed object allocation. |
drivers/hwmon/tmp401.c |
Use managed object allocation. |
drivers/hwmon/thmc50.c |
Use managed object allocation. |
drivers/hwmon/stts751.c |
Use managed object allocation. |
drivers/hwmon/shtc1.c |
Use managed object allocation. |
drivers/hwmon/sht21.c |
Use managed object allocation. |
drivers/hwmon/powerz.c |
Use managed object allocation. |
drivers/hwmon/nct7363.c |
Use managed object allocation. |
drivers/hwmon/mlxreg-fan.c |
Use managed object allocation. |
drivers/hwmon/max6697.c |
Use managed object allocation. |
drivers/hwmon/max6650.c |
Use managed object allocation. |
drivers/hwmon/max6639.c |
Use managed object allocation. |
drivers/hwmon/max6621.c |
Use managed object allocation. |
drivers/hwmon/max6620.c |
Use managed object allocation. |
drivers/hwmon/max31722.c |
Use managed object allocation. |
drivers/hwmon/max197.c |
Use managed object allocation. |
drivers/hwmon/max127.c |
Use managed object allocation. |
drivers/hwmon/ltc4261.c |
Use managed object allocation. |
drivers/hwmon/lm92.c |
Use managed object allocation. |
drivers/hwmon/lm83.c |
Use managed object allocation. |
drivers/hwmon/lm80.c |
Use managed object allocation. |
drivers/hwmon/lm77.c |
Use managed object allocation. |
drivers/hwmon/lm73.c |
Use managed object allocation. |
drivers/hwmon/kfan.c |
Use managed object allocation. |
drivers/hwmon/kbatt.c |
Use managed object allocation. |
drivers/hwmon/jc42.c |
Use managed object allocation. |
drivers/hwmon/ina3221.c |
Use managed object allocation. |
drivers/hwmon/ina238.c |
Use managed object allocation. |
drivers/hwmon/hwmon.c |
Use managed object allocation. |
drivers/hwmon/htu31.c |
Use managed object allocation. |
drivers/hwmon/gl520sm.c |
Use managed object allocation. |
drivers/hwmon/gl518sm.c |
Use managed object allocation. |
drivers/hwmon/emc1812.c |
Use managed object allocation. |
drivers/hwmon/ds620.c |
Use managed object allocation. |
drivers/hwmon/adt7411.c |
Use managed object allocation. |
drivers/hwmon/adm9240.c |
Use managed object allocation. |
drivers/hwmon/adm1177.c |
Use managed object allocation. |
drivers/hwmon/adcxx.c |
Use managed object allocation. |
drivers/hv/mshv_regions.c |
Use an array allocation helper. |
drivers/hv/channel.c |
Use a zeroed-array allocation helper. |
drivers/hid/hid-letsketch.c |
Use managed object allocation. |
drivers/hid/hid-goodix-spi.c |
Use managed object allocation. |
drivers/gpu/tests/gpu_random.c |
Use an array allocation helper. |
drivers/gpu/drm/xe/Kconfig |
Select configfs support for Xe. |
drivers/gpio/gpiolib-shared.h |
Track shared GPIO configuration users. |
drivers/gpio/gpiolib-of.c |
Initialize translated GPIO flags. |
drivers/gpio/gpio-zevio.c |
Use managed object allocation. |
drivers/gpio/gpio-xgene.c |
Use managed object allocation. |
drivers/gpio/gpio-wcove.c |
Use managed object allocation. |
drivers/gpio/gpio-visconti.c |
Use managed object allocation. |
drivers/gpio/gpio-usbio.c |
Use managed object allocation. |
drivers/gpio/gpio-ts4800.c |
Use managed object allocation. |
drivers/gpio/gpio-syscon.c |
Use managed object allocation. |
drivers/gpio/gpio-siox.c |
Use managed object allocation. |
drivers/gpio/gpio-sifive.c |
Use managed object allocation. |
drivers/gpio/gpio-sch311x.c |
Use managed object allocation. |
drivers/gpio/gpio-sch.c |
Use managed object allocation. |
drivers/gpio/gpio-rtd.c |
Use managed object allocation. |
drivers/gpio/gpio-reg.c |
Use managed object allocation. |
drivers/gpio/gpio-rcar.c |
Use managed object allocation. |
drivers/gpio/gpio-pisosr.c |
Use managed object allocation. |
drivers/gpio/gpio-pch.c |
Use managed object allocation. |
drivers/gpio/gpio-nct6694.c |
Use managed object allocation. |
drivers/gpio/gpio-mxs.c |
Use managed object allocation. |
drivers/gpio/gpio-mxc.c |
Use managed object allocation. |
drivers/gpio/gpio-mt7621.c |
Use managed object allocation. |
drivers/gpio/gpio-moxtet.c |
Use managed object allocation. |
drivers/gpio/gpio-mlxbf2.c |
Use managed object allocation. |
drivers/gpio/gpio-mlxbf.c |
Use managed object allocation. |
drivers/gpio/gpio-ml-ioh.c |
Use managed object allocation. |
drivers/gpio/gpio-max77620.c |
Use managed object allocation. |
drivers/gpio/gpio-latch.c |
Use managed object allocation. |
drivers/gpio/gpio-kempld.c |
Use managed object allocation. |
drivers/gpio/gpio-grgpio.c |
Use managed object allocation. |
drivers/gpio/gpio-ge.c |
Use managed object allocation. |
drivers/gpio/gpio-exar.c |
Use managed object allocation. |
drivers/gpio/gpio-en7523.c |
Use managed object allocation. |
drivers/gpio/gpio-em.c |
Use managed object allocation. |
drivers/gpio/gpio-cgbc.c |
Use managed object allocation. |
drivers/gpio/gpio-amdpt.c |
Use managed object allocation. |
drivers/gnss/sirf.c |
Use managed object allocation. |
drivers/fsi/fsi-occ.c |
Use managed object allocation. |
drivers/fpga/xilinx-spi.c |
Use managed object allocation. |
drivers/fpga/socfpga.c |
Use managed object allocation. |
drivers/fpga/altera-cvp.c |
Use managed object allocation. |
drivers/extcon/extcon-max77843.c |
Use managed object allocation. |
drivers/extcon/extcon-max14577.c |
Use managed object allocation. |
drivers/extcon/extcon-intel-int3496.c |
Use managed object allocation. |
drivers/extcon/extcon-gpio.c |
Use managed object allocation. |
drivers/dma/dw/platform.c |
Use managed object allocation. |
drivers/dma/dw/of.c |
Use managed object allocation. |
drivers/dma/dw/idma32.c |
Use managed object allocation. |
drivers/dma/dw/dw.c |
Use managed object allocation. |
drivers/dma/dw/acpi.c |
Use managed object allocation. |
drivers/dma/apple-admac.c |
Use managed flexible-array allocation. |
drivers/devfreq/imx-bus.c |
Use managed object allocation. |
drivers/crypto/sahara.c |
Use managed object allocation. |
drivers/crypto/sa2ul.c |
Use managed object allocation. |
drivers/crypto/qce/core.c |
Use managed object allocation. |
drivers/crypto/img-hash.c |
Use managed object allocation. |
drivers/crypto/ccp/tee-dev.c |
Use managed object allocation. |
drivers/crypto/ccp/sp-platform.c |
Use managed object allocation. |
drivers/crypto/ccp/sp-dev.c |
Use managed object allocation. |
drivers/comedi/drivers.c |
Use a zeroed-array allocation helper. |
drivers/clocksource/em_sti.c |
Use managed object allocation. |
drivers/clk/visconti/reset.c |
Use managed object allocation. |
drivers/clk/sprd/pll.c |
Use a zeroed-array allocation helper. |
drivers/clk/mediatek/reset.c |
Use managed object allocation. |
drivers/clk/clk-si570.c |
Use managed object allocation. |
drivers/clk/clk-si544.c |
Use managed object allocation. |
drivers/clk/clk-si514.c |
Use managed object allocation. |
drivers/clk/clk-pwm.c |
Use managed object allocation. |
drivers/clk/clk-plldig.c |
Use managed object allocation. |
drivers/clk/clk-palmas.c |
Use managed object allocation. |
drivers/clk/clk-lochnagar.c |
Use managed object allocation. |
drivers/clk/clk-gemini.c |
Use managed object allocation. |
drivers/clk/aspeed/clk-aspeed.c |
Use managed object allocation. |
drivers/char/tpm/tpm_svsm.c |
Use managed object allocation. |
drivers/bus/uniphier-system-bus.c |
Use managed object allocation. |
drivers/bus/ts-nbus.c |
Use managed object allocation. |
drivers/bus/simple-pm-bus.c |
Use managed object allocation. |
drivers/bus/imx-weim.c |
Use managed object allocation. |
drivers/bluetooth/btsdio.c |
Use managed object allocation. |
drivers/block/null_blk/main.c |
Clear cached-device state when adding a device. |
drivers/bcma/host_soc.c |
Use managed object allocation. |
drivers/base/pinctrl.c |
Use managed object allocation. |
drivers/auxdisplay/max6959.c |
Use managed object allocation. |
drivers/auxdisplay/ht16k33.c |
Use managed object allocation. |
drivers/auxdisplay/arm-charlcd.c |
Use managed object allocation. |
drivers/ata/sata_rcar.c |
Use managed object allocation. |
drivers/ata/pata_rdc.c |
Use managed object allocation. |
drivers/ata/pata_rb532_cf.c |
Use managed object allocation. |
drivers/ata/libahci.c |
Use managed object allocation. |
drivers/ata/ahci_xgene.c |
Use managed object allocation. |
drivers/ata/ahci_mtk.c |
Use managed object allocation. |
drivers/acpi/button.c |
Use managed object allocation. |
drivers/acpi/battery.c |
Use managed object allocation. |
drivers/acpi/ac.c |
Use managed object allocation. |
Documentation/devicetree/bindings/usb/cypress,hx3.yaml |
Make the peer-hub property optional. |
crypto/crypto_engine.c |
Use managed object allocation. |
crypto/asymmetric_keys/verify_pefile.c |
Use a zeroed-array allocation helper. |
block/genhd.c |
Report discard alignment through the correct helper. |
block/blk.h |
Route DMA-buffer operations through split checks. |
arch/x86/kvm/vmx/nested.c |
Add a break in nested host-state restoration. |
arch/arm64/tools/cpucaps |
Add the broken AMU core-counter workaround capability. |
arch/arm64/include/asm/suspend.h |
Expand saved suspend context to 18 registers. |
Review effort: Balanced
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Upstream merge