You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I installed uPiot to Sublime 3. When I issue any of the commands that would talk to the board through the serial port I get a dialog box to select which COM port to use, but when I select the port my ESP32 is connected to the port select window closes with no apparent communications. I have tried open console, erase flash, download firmware, etc. I have tried two different boards one with Micropython already programmed and one erased. I have been able to use uPyCraft successfully so the boards and COM port are OK.
Can you please check the output of the Sublime Text console ST Menu > View > Show Console, after try to open the console or any other command it should show any possible error. Paste the output here so I can help you
On Tue, Oct 31, 2017 at 8:33 PM, gepd ***@***.***> wrote:
Can you please check the output of the Sublime Text console ST Menu >
View > Show Console, after try to open the console or any other command
should show any possible error. Paste the output here so I can help you
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<#1 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/AEWshX05ouFDhQO3XBTbHyK8ecR26WChks5sx8pkgaJpZM4QNns9>
.
Now I've realized; after you select the port no new window is open? It should create a new one with the console, I'll try the plugin at windows 8, can you confirm the Sublime Text version you have installed?
What type of window should I open? I can try tonight. I downloaded and
installed 64 bit Sublime yesterday with the most recent version. I first
un-installed an old install and deleted some sublime directores in
user\appData\.
On Tue, Oct 31, 2017 at 11:38 PM, gepd ***@***.***> wrote:
Now I've realized; after you select the port no new window is open? It
should create a new one with the console, I'll try the plugin at windows 8,
can you confirm the Sublime Text version you have installed?
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<#1 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/AEWshaTHoVlc4a9MzbmlT67kh1ZRMemdks5sx_WsgaJpZM4QNns9>
.
I've installed Windows 8.1 and this is how it looks like:
So I think the problem may be with the board (it's weird because ampy is from adafruit too), as I don't have one to debug it, can you try ampy in the board?
The are the steps to install it and test it:
Install it with pip install adafruit-ampy
List the file in your device with ampy -p yourport ls
I tried ampy a few weeks ago just and it seemed to work. One difference I
see from your example above is as soon as you type open yours has COM3
already selected. My computer was two COM ports and I am prompted to
select one. When I make the selection the selection box closes and then
nothing. I will try ampy again just to be sure. I am guessing it is
unable to open the port I have selected. I was planning to put some prints
in the sampy code. Do you know if the print results will come out the
sublime consode? What time zone are you in? I am gmt -6 Minnesota, USA
The problem was there; if the plugin detect only one device, it will automatically select it and open the console if you have more than one devices it will make you select a port, but if you already have selected one and it's available it will select that port. To choose a new one, you should use the option UPIOT: Select Serial Port and then open the console.
There was a bug when multiples devices were connected. I've already fixed and you should get the update the next time you use ST, I still don't add a warning to restart Sublime after update the plugin, but you should do it to note the new changes.
I'm GMT-3 Santiago, Chile
Let me know if the problem is fixed or you find a new one, I'll happy to help you
Hi, I am able to connect to my ESP32 board after I updated your new files.
Here are some observations and questions. Please excuse me if some of my
questions are stupis as I am just starting with Micropython ans ESP32 and
Sublime.
1. Is there a good way to update your changes? I un-installed and
re-installed upiot. Could I just overlay the new files on top of the old?
2. Is there a way to connect to the ESP where every key goes to the ESP.
Right now many keys seem to be filtered out like ctrl-C and other control
keys.
3. when I did 'sampy ls' it showed my files, but when I did 'sampy run
myfile.py' it showed file not found
4. The run command 'UPIOT:Run Current File' did not seem to work, but I
think it did work one time, i think
5. It would be nice to have a stop program command, perhaps the ctrl-C
functioning would satisfy that.
6. It would be nice to show the COM port connection status somewhere.
I only was able to spend a short time today, but I will in the near
future. I was planning to merge ampy with the terminal example that is
with pyserial snd build my own ide, but now I will use upiot.
Thank You
John
On Wed, Nov 1, 2017 at 12:39 PM, gepd ***@***.***> wrote:
The problem was there; if the plugin detect only one device, it will
automatically select it and open the console if you have more than one
devices it will make you select a port, but if you already have selected
one and it's available it will select that port. To choose a new one, you
should use the option UPIOT: Select Serial Port and then open the console.
There was a bug when multiples devices were connected. I've already fixed
and you should get the update the next time you use ST, I still don't add a
warning to restart Sublime after update the plugin, but you should do it to
note the new changes.
I'm GMT-3 Santiago, Chile
Let me know if the problem is fixed or you find a new one
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<#1 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/AEWshTMph_FaQSu91D-u-XyFUwvc7mR9ks5syKy2gaJpZM4QNns9>
.
Activity
gepd commentedon Nov 1, 2017
Can you please check the output of the Sublime Text console
ST Menu > View > Show Console, after try to open the console or any other command it should show any possible error. Paste the output here so I can help youjevers76 commentedon Nov 1, 2017
gepd commentedon Nov 1, 2017
Now I've realized; after you select the port no new window is open? It should create a new one with the console, I'll try the plugin at windows 8, can you confirm the Sublime Text version you have installed?
jevers76 commentedon Nov 1, 2017
gepd commentedon Nov 1, 2017
I've installed Windows 8.1 and this is how it looks like:
So I think the problem may be with the board (it's weird because ampy is from adafruit too), as I don't have one to debug it, can you try ampy in the board?
The are the steps to install it and test it:
pip install adafruit-ampyampy -p yourport lsLet me know if that command work with your board
jevers76 commentedon Nov 1, 2017
Bug fix to open the console when multiples boards are connected (Issue:
gepd commentedon Nov 1, 2017
The problem was there; if the plugin detect only one device, it will automatically select it and open the console if you have more than one devices it will make you select a port, but if you already have selected one and it's available it will select that port. To choose a new one, you should use the option
UPIOT: Select Serial Portand then open the console.There was a bug when multiples devices were connected. I've already fixed and you should get the update the next time you use ST, I still don't add a warning to restart Sublime after update the plugin, but you should do it to note the new changes.
I'm GMT-3 Santiago, Chile
Let me know if the problem is fixed or you find a new one, I'll happy to help you
jevers76 commentedon Nov 2, 2017
gepd commentedon Nov 2, 2017
I'll move your las question to a new issue to make this more organized. see #2